Print this page
Contents
Catalog Links

Bulletins

300

EGT 324WI Product Design and Development

Ideation, conceptualization, and development of consumer products. Utilization of freestyle and NURBS based computer-aided design tools to solve product design problems. Writing Intensive. Prerequisite: EGT 226; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(2-2)

EGT 326 Manufacturing Methods Analysis

Study of methods, materials, tools, and equipment for productivity measurements and improvement. Prerequisites: EGT 170; one of: STA 282QR, STA 382QR, STA 392; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(3-0)

EGT 327 Industrial Safety

A study of the principles and practices of safety management with emphasis on occupational safety standards and loss control. Prerequisite: CHM 131 or CHM 141; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(2-2)

EGT 350 Mechanism Design

Study of mechanisms with graphical and analytical analysis of displacement, velocity, acceleration, motion, gearing, gear trains, linkages, and cams. Prerequisite: EGT 279 or EGR 251 with a grade of C- or better; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(3-0)

EGT 352 Applied Fluid Mechanics

Introduction to principal concepts and methods of fluid mechanics. Topics include pressure, hydrostatics, buoyancy; mass and momentum conservation; flow through pipes; and pumps. Prerequisites: EGT 281 or EGR 253; EGR 200 with a C- or better; Permission of E&T Advisor; cumulative GPA of 2.5 or higher.

Credits
3(3-0)

EGT 356 Thermodynamics

Study of thermodynamics and basic tools necessary to obtain quantitative solutions to common engineering applications involving energy and its conversion, conservation and transfer. Prerequisites: PHY 145QR and PHY 175; or PHY 130QR and PHY 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(3-0)

EGT 357 Residential Architectural Graphics

Modern house planning resulting in a complete set of plans and specifications. Prerequisites: EGT 226; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(1-4)

EGT 365 Manufacturing Processes II

Introduces basic polymer formulation, properties of plastics materials, methods of molding plastics, and the fabrication and decoration of plastic articles. Prerequisites: CHM 131 or 141; EGT 130, EGT 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(2-2)

EGT 375 Robotics

Introduction to industrial robotics, including robot terms, classifications, coordinate systems, components and operation, and programming. Prerequisites: CPS 180 or EGR 200; IET 291 or EGR 290; One of: MTH 132, MTH 133, MTH 217; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(2-2)

EGT 377 Computer Numerical Control Programming

Programming and operation of CNC machines, including CNC vertical milling center and turning center. Emphasis on manual programming, CAM design, and machine setup and operation. Credit may not be earned in both EGR 377 and EGT 377. Prerequisites: EGT 154, EGT 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.

Credits
3(2-2)

EGT 379 Mechanics of Materials

Introduction to methods of determining the internal stresses and deflections of basic load-carrying members of construction and machine applications. Prerequisites: EGT 279 or EGR 251 with a C- or better; EGR 200 with a C- or better; MTH 132 or MTH 133; Permission of E&T Advisor; cumulative GPA of 2.5 or higher.

Credits
3(3-0)

EGT 397 Special Studies

Individual investigation and research to increase ones technical competency. Prerequisites: Cumulative GPA of 2.5 or higher.

Credits
1-6(Spec)